A4-M3-1
Floating Self-Clinching Fasteners A4, AS, AC
A4-M3-1
Floating Self-Clinching Fasteners A4, AS, AC
Locking and Non-locking Threads These fasteners provide load-bearing threads in thin sheets and permit up to 0.76mm adjustment for mating hole misalignment.
The self-clinching feature offers fast and simple assembly. The fasteners are squeezed into prepared holes using any standard press. The sheet remains flush on one side, and the fastener is permanently locked in place.
Extra strength and support in assembly is obtained by the threads of the floating nut extending fully into the retainer shank (a unique PEM feature). A self-locking version of the fastener is also offered. Thread locking torque performance is equivalent to applicable NASM25027 specifications.
Non-locking Type A4 and self-locking Type LA4 fasteners provide load-bearing threads in stainless steel sheets as thin as 0.97mm with hardness up to HRB 88 on the Rockwell “B” scale.
Many PEM Type AS and AC self-clinching floating fasteners correspond to sizes in US NASM45938/11 specifications. Check our web site for a complete Military Specification and National Aerospace Standards Reference Guide (Bulletin NASM).
Specifications
- Thread Code
- M3
- Thread Size
- M3 x 0.5
- Thread Specification
- 6H, ASME B1.13M
- Shank Code
- 1
- Fastener Material
- 400 Series Stainless Steel
- Fastener Materials – Nut
- 300 Series Stainless Steel
- For Use in Sheet Hardness
- HRB 88 / HB 183 or Less
- Float
- 0.38mm minimum, in all directions from center, 0.76mm total
- Product Category
- Floating Self-Clinching Fasteners A4, AS, AC – Metric
- Thread Type
- Internal, Non-Locking
- Brand
- PEM
- Hole Size in Sheet +.003 / +0.08mm_mm
- 7.37mm
- PEM Product Family
- A4
- Product Type
- OtherFasteners
- A Shank Max
- 0.97mm
- E ± 0.38_mm
- 9.14mm
- Hole Size in Sheet + 0.08_mm
- 7.37mm
- Min. Dist. Hole C/L to Edge_mm
- 7.62mm
- C Max._mm
- 7.35mm
- D Max._mm
- 7.37mm
- T1 Max._mm
- 3.31mm
- T2 Max._mm
- 4.83mm
Installation & Performance Data
| Type | Thread Code | Test Sheet Material | A ±.001 (in.) | A ±0.03 (mm) | B ±.005 (in.) | B ±0.13 (mm) | Haeger Part Number Anvil | Haeger Part Number Punch | Installation (kN) | Pemserter Part Number Anvil | Pemserter Part Number Punch | Retainer Pushout (N) | Retainer Torque-out (N•m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| A4-LA4 | M3 | 300 Series Stainless Steel | 0.054 | 1.37 | 0.315 | 8 | H-131-4L | H-108-0020L | 40 | 8013889 | 975200048 | 890 | 9.6 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|