CKS-632-1
PEM® CASTSERT® Press-in Inserts
CKS-632-1
PEM® CASTSERT® Press-in Inserts
For Castings and Soft Metals HRB 70 / HB 125 or less PEM® 300 Series Stainless Steel CASTSERT® inserts provide strong, durable metal threads in soft metals and die-cast alloys. The simple press-in and rapid installation process for these inserts uses a flat punch and anvil to install all sizes and lengths, approximately 80% faster than other methods.
- Designed for flush installation with flat punch and anvil into blind holes or thru-holes
- Process cost savings vs. coil inserts or thread tapping
- Installed into drilled holes or as-cast holes with low draft angle
- Pilot for rapid seating and self-alignment
- Symmetric for auto-feed capability
Fastener drawings and models are available at www.pemnet.com
Specifications
- Thread Code
- 632
- Thread Size
- .138-32 (#6-32)
- Thread Specification
- 2B, ASME B1.1
- Fastener Material
- 300 Series Stainless Steel
- Standard Finish
- Passivated and/or tested per ASTM A380
- For Use in Sheet Hardness
- For Use in Castings and Soft Metals HRB 70 / HB 125 or Less
- Product Category
- PEM® CASTSERT® Press-in Inserts – Unified
- Thread Type
- Internal
- After Knurl E Nom_in
- 0.259in
- Brand
- PEM
- Length A ± .005_in
- 0.2in
- Min. Sheet Thickness R_in
- 0.205in
- Min Dia H of Tapered Hole at Length R (in)
- 0.241
- PEM Product Family
- CKS
- Pilot C Max._in
- 0.24in
- Product Type
- Inserts
- Straight Hole Dia. D Tolerance +/- (in)
- .003-.000
- Min. Dist. Hole C/L to Edge_in
- 0.198in
Installation & Performance Data
| Type | Thread Code | Test Sheet Material | Installation (lbs.) | Anvil Dim A (in.) | Anvil Dim B (in.) | Anvil Dim C (in.) | Haeger Part Number Anvil | Haeger Part Number Punch | Length Code | Pullout (lbs.) | Torque-out (in. lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| CKS | 632 | ADC12 Die Cast Aluminum (A383 Equivalent) | 1700 | 3 | 2.5 | 1 | H-108-0020L | H-108-0020L | 1 | 180 | 54 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|