FHA-032-12
Self-Clinching Threaded Studs – Type FH/FHS/FHA
FHA-032-12
Self-Clinching Threaded Studs – Type FH/FHS/FHA
PEM® self-clinching studs are installed by placing them in properly sized holes in the sheets and squeezing into place with any standard press. The squeezing action embeds the head of the stud into the sheet. The metal displaced by the head flows smoothly and evenly around the ribs and into the annular groove – creating a flushhead assembly and securely locking the stud into the sheet with high torque-out and pushout resistances.
FH (flush-head) studs are available in aluminum, steel, or stainless steel. They are also available unthreaded on special order. – Flush-head in designated minimum sheet thickness or greater.
- Type FH is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 80 or less and HB (Hardness Brinell) 150 or less.
- Type FHS is recommended for use in steel or aluminum sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
- Type FHA is recommended for use in aluminum sheets HRB (Rockwell “B” scale) 50 or less and HB (Hardness Brinell) 82 or less.
Specifications
- Thread Code
- 032
- Thread Size
- .190-32 (#10-32)
- Thread Specification
- 2A, ASME B1.1
- Fastener Material
- Aluminum (Plain Finish)
- Standard Finish
- No Finish
- For Use in Sheet Hardness
- HRB 50 / HB 82 or less
- Product Category
- Self-Clinching Threaded Studs – Type FH/FHS/FHA – Unified
- Thread Type
- External
- Brand
- PEM
- PEM Product Family
- FHA
- Product Type
- Studs
- H ± .015_in
- 0.256in
- Hole Size in Sheet +.003 – .000_in
- in
- L Len Pm 015in Or 4mm
- 0.75in
- Min. Dist. Hole C/L to Edge_in
- 0.281in
- S Max._in
- 0.1in
Installation & Performance Data
| Type | Thread Code | Installation (lbs.) | Anvil Dim A (in.) | Anvil Dim C (in.) | Haeger Anvil For Sheet <= .059 (in.) | Haeger Anvil For Sheet > .060 (in.) | Haeger Punch | Pemserter Anvil For Sheet <= .059 (in.) | Pemserter Anvil For Sheet > .060 (in.) | Pemserter Punch | PULL THRU (lbs.) | Pushout (lbs.) | REC. NUT TIGHTENING TORQUE (in. lbs.) | SHEET HARDNESS HR15T | TEST SHEET THICKNESS & MATERIAL | Torque-out (in. lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| FHA | 32 | 3200 | .216 – .220 | .191 – .194 | H-103-10LC | H-103-10L | H-108-0020L | 970200246300 | 970200009300 | 975200048 | 600 | 220 | 14 | 75 | .061″ 5052-H34 Aluminum | 28 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|