HFLH-M8-40ZI
Type HFLH™ Hard Panel Studs
HFLH-M8-40ZI
Type HFLH™ Hard Panel Studs
- Installs into thinner, harder, high strength steel materials (high strength steel sheets up to 700 MPa maximum ultimate tensile)
- Allows overall weight reduction for all vehicles
- Provides lower installed cost
Compare to other thin sheet fastening devices:– Addresses environmental concerns
- Lighter weight
- Close to edge of panel mounting
- No embossing required
- Hardened stud material provides stronger thread strength
- Can be installed automatically using press or in-die technology
Specifications
- Thread Code
- M8
- Thread Size X Pitch
- M8 x 1.25
- Thread Specification
- ASME B1.1
- Fastener Material
- Heat-Treated Alloy Steel
- For Use in Sheet Hardness
- HRB 96 / HB 216 or Less
- Length Code
- 40
- Product Category
- Type HFLH™ Hard Panel Studs
- Thread Type
- PEM studs: Standard
- Application Type
- Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
- Base Panel Material
- Hard Steel
- Brand
- PEM
- Fastener Characteristics
- Threaded External
- Industry
- Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
- Installation Equipment/Method
- C-Frame Automatic Feed, C-Frame Manual Feed, In-Die
- PEM Product Family
- FH
- Product Type
- Studs
- Technology Type
- Self-Clinching
- Unit (Metric/Unified)
- Metric
- H Plus Minus 025 Mm
- 15.3mm
- Hole Size in Sheet + 0.13_mm
- 8mm
- L Len Pm 015in Or 4mm
- 40mm
- L ± 0.4_mm
- 40mm
- Max. Hole in Attached Parts_mm
- 10.3mm
- Min. Sheet Thickness_mm
- 1.5mm
- S Max._mm
- 3.3mm
- T Max._mm
- 2.13mm
Installation & Performance Data
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | SHEET HARDNESS HRB | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | TENSILE STRENGTH (kN) | PULL-THRU (kN) | TEST BUSHING HOLE SIZE FOR PULL THRU TESTS |
|---|---|---|---|---|---|---|---|---|---|---|
| HFLH | M8 | 26 | 1.5 mm HC500LA | 91 | 71.1 | 2400 | 33.9 | 32.9 | 27.5 | 10.3 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|