PF7M-632-1CN
Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching Type PF7M
PF7M-632-1CN
Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching Type PF7M
- Self-clinching mounting design provides high pushout resistance.
- Installs flush on back side of panel.
- Does not require special hole preparation.
Specifications
- Thread Code
- 632
- Thread Size(x Pitch)
- .138-32 (#6-32)
- Thread Specification
- 2A, ASME B1.1
- Screw Length Code
- 1
- Material Retainer
- Carbon Steel
- Material Spring
- 300 Series Stainless Steel
- Screw Material
- Hardened Carbon Steel
- Finish Spring
- Natural Finish
- Retainer Finish
- Bright nickel over copper flash per ASTM B689, Type II
- Screw Finish
- Bright nickel over copper flash
- For Use in Sheet Hardness
- HRB 60 or Less (Hardness Rockwell “B” Scale) / HB 107 or Less (Hardness Brinell)
- Driver Size
- #2
- Product Category
- Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching – Unified Type PF7M
- Thread Type
- External
- Brand
- PEM
- G 1 Plus Minus 025 In
- 0.3in
- PEM Product Family
- PF7M
- P Pm 025in Or 64mm
- 0.065in
- Product Type
- PanelFasteners
- A Shank Max
- 0.036in
- E ± .010_in
- 0.342in
- H ± .010_in
- 0.1in
- Hole Size in Sheet +.003 – .000_in
- 0.25in
- Min. Dist. Hole C/L to Edge_in
- 0.29in
- C Max._in
- 0.249in
- T1 Nom._in
- 0.41in
- T2 Nom._in
- 0.61in
Installation & Performance Data
| Type | Thread Code | Test Sheet Material | Installation (lbs.) | Retainer Pushout (lbs.) | Anvil Dim A ±.002 (in.) | Anvil Dim C ±.002 (in.) | Haeger Part Number Punch | Max. Rec. Tightening Torque (in. lbs.) | Min. Screw Tensile (lbs.) | Pemserter Part Number Anvil | Pemserter Part Number Punch |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PF7M | 632 | Aluminum | 2000 | 95 | 0.333 | 0.33 | H-132-6L | 8.6 | 855 | 8016176 | 8003519 |
| PF7M | 632 | Cold-rolled Steel | 3500 | 150 | 0.333 | 0.33 | H-132-6L | 8.6 | 855 | 8016176 | 8003519 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|