PF7M-M4-0CN
Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching Type PF7M
PF7M-M4-0CN
Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching Type PF7M
- Self-clinching mounting design provides high pushout resistance.
- Installs flush on back side of panel.
- Does not require special hole preparation.
Specifications
- Thread Code
- M4
- Thread Size(x Pitch)
- M4 x 0.7
- Thread Specification
- 6g, ASME B1.13M
- Screw Length Code
- 0
- Material Retainer
- Carbon Steel
- Material Spring
- 300 Series Stainless Steel
- Screw Material
- Hardened Carbon Steel
- Finish Spring
- Natural Finish
- Retainer Finish
- Bright nickel over copper flash per ASTM B689, Type II
- Screw Finish
- Bright nickel over copper flash
- For Use in Sheet Hardness
- HRB 60 or Less (Hardness Rockwell “B” Scale) / HB 107 or Less (Hardness Brinell)
- Driver Size
- #2
- Product Category
- Captive Panel Screw, Screw Head, Spring-loaded, Self-Clinching – Metric Type PF7M
- Thread Type
- External
- Brand
- PEM
- G Plus Minus 025in 64mm
- 6.1mm
- Hole Size in Sheet +.003 / +0.08mm_mm
- 7.92mm
- PEM Product Family
- PF7M
- P Pm 025in Or 64mm
- 0mm
- Product Type
- PanelFasteners
- A Shank Max
- 0.92mm
- E ± 0.25_mm
- 10.29mm
- H Plus Minus 025 Mm
- 3mm
- Hole Size in Sheet + 0.08_mm
- 7.92mm
- Min. Dist. Hole C/L to Edge_mm
- 8.38mm
- C Max._mm
- 7.9mm
- T1 Nom._mm
- 10.92mm
- T2 Nom._mm
- 16mm
Installation & Performance Data
| Type | Thread Code | Test Sheet Material | Anvil Dim A ±0.05 (mm) | Anvil Dim C ±0.05 (mm) | Haeger Part Number Punch | Installation (kN) | Min. Screw Tensile (N) | Pemserter Part Number Anvil | Pemserter Part Number Punch | Rec. Tightening Torque (N•m) | Retainer Pushout (N) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| PF7M | M4 | 5052-H34 Aluminum | 8.9 | 9.8 | H-132-8L | 13.3 | 5010 | 8016177 | 8003520 | 1.57 | 445 |
| PF7M | M4 | Cold-rolled Steel | 8.9 | 9.8 | H-132-8L | 20 | 5010 | 8016177 | 8003520 | 1.57 | 710 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|