S-RTM8-1ZC
All Metal, RT® Free-Running Locknuts
S-RTM8-1ZC
All Metal, RT® Free-Running Locknuts
PEM® RT® free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.
- Screw turns freely until a clamp load is applied.
- Resistant to vibrational loosening.
- Back side of panel is flush or sub-flush for screw installation.
- Locking feature reusability is not affected by number of on/off cycles.
- Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.
Specifications
- Thread Code
- RTM8
- Thread Size(x Pitch)
- M8 x 1.25
- Shank Code
- 1
- Standard Finish
- SC1(5um), Type II, yellow, Zinc plated per ASTM B633
- For Use in Sheet Hardness
- HRB 80 / HB 150 or less
- Product Category
- All Metal, RT® Free-Running Locknuts – Metric
- Hole Size in Sheet +.003 / +0.08mm_mm
- 10.5mm
- PEM Product Family
- RT
- Product Type
- Nuts
- A Shank Max
- 1.38mm
- E ± 0.25_mm
- 12.7mm
- Hole Size in Sheet + 0.08_mm
- 10.5mm
- Min. Dist. Hole C/L to Edge_mm
- 9.7mm
- C Max._mm
- 10.47mm
- T ± 0.25_mm
- 5.47mm
Installation & Performance Data
| Type | Thread Code | Shank Code | Test Sheet Material | Anvil Dim A ±0.05 (mm) | Anvil Dim P ±0.13 (mm) | Haeger Part Number Anvil | Haeger Part Number Punch | Installation (kN) | Pemserter Part Number Anvil | Pemserter Part Number Punch | Pushout (N) | Torque-out (N•m) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| S | RTM8 | 1 | 5052-H34 Aluminum | 13.08 | 5.08 | H-101-05/M8L | H-108-0020L | 18-32 | 975200039 | 975200048 | 1690 | 13.6 |
| S | RTM8 | 1 | Cold-rolled Steel | 13.08 | 5.08 | H-101-05/M8L | H-108-0020L | 27-36 | 975200039 | 975200048 | 1865 | 18.7 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|