SGPC-440-10
Swaging Collar Studs, Non Flush – Type SGPC ™
SGPC-440-10
Swaging Collar Studs, Non Flush – Type SGPC ™
STUD, SS (303HQ MAT’L)
Specifications
- Thread Code
- 440
- Thread Size
- .112-40 (#4-40)
- Thread Specification
- 2A, ASME B1.1
- Fastener Material
- 300 Series Stainless Steel
- Standard Finish
- Passivated and/or tested per ASTM A380
- For Use in Sheet Hardness
- Any
- Product Category
- Swaging Collar Studs, Non Flush – Type SGPC ™ – Unified
- Thread Type
- External
- Brand
- PEM
- PEM Product Family
- SGPC
- Product Type
- Studs
- Technology Type
- Broaching
- H ± .010_in
- 0.228in
- Hole Dia. of Attached Panel + .005 – .000_in
- 0.205in
- Hole Size in Sheet +.003 – .000_in
- in
- L Len Pm 015in Or 4mm
- 0.625in
- Min. Dist. Hole C/L to Edge_in
- 0.16in
- S Max._in
- 0.101in
- Sheet Thickness_in
- .024 – .047in
- T ± .004_in
- 0.024in
- T ± 0.10mm/±.004in_in
- 0.024in
Installation & Performance Data
| Type | Thread Code | Installation (lbs.) | Pemserter Part Number Anvil | Pemserter Part Number Punch | Test Sheet Material | Anvil Dim C +.001 (in.) | Anvil Dim P +.000 -.002 (in.) | Anvil Part Number | PULL THRU (lbs.) | Punch Dim A +.004 -.000 (in.) | Punch DIm B +.000 -.001 (in.) | Punch Part Number | Pushout (lbs.) | REC. NUT TIGHTENING TORQUE (in. lbs.) | TEST SHEET THICKNESS & MATERIAL | Torque-out (in. lbs.) | Max. Rec. Tightening Torque For Mating Screw (in. lbs.) | SHEET HARDNESS HRB | Test Sheet Thickness |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SGPC | 440 | 5000 | 0.113 | 0.014 | 8016984 | 512 | 0.248 | 0.022 | 8015112 | 450 | 6 | Single Sheet of .039″ 300 Series Stainless Steel | 8 | ||||||
| SGPC | 440 | 5000 | 8016984 | 8015112 | 301 Series Stainless Steel | 0.113 | 0.014 | 512 | 0.248 | 0.022 | 450 | 8 | 5 | 92 | .039” |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|