SGPC-M4-30
Swaging Collar Studs, Non Flush – Type SGPC ™
SGPC-M4-30
Swaging Collar Studs, Non Flush – Type SGPC ™
PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.
Features and Benefits– Installs into sheets as thin as .024” / 0.6mm.
- Can be used to attach dissimilar materials.
- Can be installed into most panel materials, including stainless steel and rigid non-metallic panels.
- Allows for close centerline-to-edge distance.
- Corrosion resistant.
- RoHS compliant.
Specifications
- Thread Code
- M4
- Thread Size
- M4 x 0.7
- Thread Specification
- 6g, ASME B1.13M
- Fastener Material
- 300 Series Stainless Steel
- Standard Finish
- Passivated and/or tested per ASTM A380
- For Use in Sheet Hardness
- Any
- Product Category
- Swaging Collar Studs, Non Flush – Type SGPC ™ – Metric
- Thread Type
- External
- Brand
- PEM
- Hole Size in Sheet +.003 / +0.08mm_mm
- 5.5mm
- PEM Product Family
- SGPC
- Product Type
- Studs
- Technology Type
- Broaching
- H Plus Minus 025 Mm
- 7mm
- Hole Size in Sheet + 0.08_mm
- 5.5mm
- L ± 0.4_mm
- 30mm
- Min. Dist. Hole C/L to Edge_mm
- 4.9mm
- S Max._mm
- 2.7mm
- Sheet Thickness_mm
- 0.6 – 1.2mm
- T ± 0.1_mm
- 0.6mm
- T ± 0.10mm/±.004in_mm
- 0.6mm
Installation & Performance Data
| Type | Thread Code | Test Sheet Material | Anvil Dim C +0.025 (mm) | Anvil Dim P -0.05 (mm) | Anvil Part Number | Installation (kN) | PULL THRU (N) | Punch Dim A +0.1 (mm) | Punch Dim B -0.025 (mm) | Punch Part Number | Pushout (N) | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | Torque-out (N•m) | Anvil Dim P +0.05 (mm) | MAX. REC. TIGHTENING TORQUE FOR MATING NUT (N•m) | Pemserter Part Number Anvil | Pemserter Part Number Punch | SHEET HARDNESS HRB | Test Sheet Thickness |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SGPC | M4 | 4.03 | 0.35 | 8016991 | 28.5 | 4000 | 7.5 | 0.57 | 8015119 | 2396 | 2.5 | Single Sheet of 1 mm 300 Series Stainless Steel | 2.66 | |||||||
| SGPC | M4 | 302 Series Stainless Steel | 4.03 | 28.5 | 4000 | 7.5 | 0.57 | 2396 | 2.66 | 0.35 | 1.7 | 8016991 | 8015119 | 92 | 1 mm |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|