SGPC-M5-30
Swaging Collar Studs, Non Flush – Type SGPC ™
SGPC-M5-30
Swaging Collar Studs, Non Flush – Type SGPC ™
PEM Type SGPC swaging collar studs can install into most panel material, provide strong torque-out resistance and are suitable for close centerline-to-edge situations. These studs can also accommodate multiple panels as long as the total thickness does not exceed the maximum sheet thickness.
Features and Benefits– Installs into sheets as thin as .024” / 0.6mm.
- Can be used to attach dissimilar materials.
- Can be installed into most panel materials, including stainless steel and rigid non-metallic panels.
- Allows for close centerline-to-edge distance.
- Corrosion resistant.
- RoHS compliant.
Specifications
- Thread Code
- M5
- For Use in Sheet Hardness
- Any
- Length Code
- 30
- Product Category
- Swaging Collar Studs, Non Flush – Type SGPC ™
- Thread Type
- non flush, PEM studs: Swaging collar
- Application Type
- Automotive Electronics, Datacom, Electric Vehicle Chargers, Electronics, Telecom
- Base Panel Material
- Any Panel Material
- Brand
- PEM
- Fastener Characteristics
- Threaded External
- Hole Dia. of Attached Panel +0.13_mm
- 7.45mm
- Industry
- Automotive Electronics, Datacom & Telecom, Industrial & Commercial
- Installation Equipment/Method
- C-Frame Manual Feed
- PEM Product Family
- FH, SS
- Product Type
- Studs
- Technology Type
- Broaching
- Unit (Metric/Unified)
- Metric
- H Plus Minus 025 Mm
- 8mm
- Hole Size in Sheet + 0.08_mm
- 6.5mm
- L Len Pm 015in Or 4mm
- 30mm
- L ± 0.4_mm
- 30mm
- S Max._mm
- 2.8mm
- T ± 0.1_mm
- 0.6mm
Installation & Performance Data
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL-THRU (N) | |||
|---|---|---|---|---|---|---|---|---|---|---|
| SGPC | M5 | 3.3 | Single Sheet of 1 mm 300 Series Stainless Steel | 35.6 | 3200 | 5.96 | 4284 |
| TYPE | THREAD CODE | REC. NUT TIGHTENING TORQUE (N•m) | TEST SHEET THICKNESS & MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | PULL-THRU (N) | |
|---|---|---|---|---|---|---|---|---|
| SGPC | M5 | 3.3 | Single Sheet of 1 mm 300 Series Stainless Steel | 35.6 | 3200 | 5.96 | 4284 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|