SKSF-6060-12ZI
SELF-CLINCHING KEYHOLE® FASTENERS – SKSF™
SKSF-6060-12ZI
SELF-CLINCHING KEYHOLE® FASTENERS – SKSF™
PEM® KEYHOLE® Standoffs and sheet joining fasteners are designed so that a PC board or panel can be quickly slipped into place and then removed from an assembly by simply sliding the board sideways and lifting it off. These standoffs and fasteners can save valuable time and dramatically reduce the amount of loose hardware required.
SKSF™ standoffs can be used for spacing or mounting of replaceable components. Typically, several standoffs are used with one standard PEM® threaded standoff which accepts a screw to secure the board or component against any unwanted movement.
- Allow detachable spacing of two sheets
- Clinch feature mounts fastener permanently and flush into metal sheet
- Unique barrel design allows for quick attachment and detachment
- Makes horizontal or vertical component mounting possible
Specifications
- Fastener Material
- Hardened Steel
- Standard Finish
- Colorless, SC1 (5µm) Type III, Zinc plated per ASTM B633
- For Use in Sheet Hardness
- HRB 80 / HB150 or less
- Panel 1 (Bottom) Sheet Hardness Max.
- HRB 80 / HB 150
- Product Category
- SELF-CLINCHING KEYHOLE® FASTENERS – SKSF™ – Unified
- Brand
- PEM
- PEM Product Family
- SKSF
- Product Type
- OtherFasteners
- A ± .003_in
- 0.099in
- B ± .003_in
- 0.177in
- B ± 0.075mm/±.003in_in
- 0.177in
- D Anvil Hole + .003 – .000_in
- 0.216in
- H – Nom._in
- 0.25in
- L ± .005_in
- 0.375in
- M Max._in
- 0.108in
- C Max._in
- 0.212in
- Panel 1 (Bottom) Edge Distance C1 Min._in
- 0.26in
- Panel 1 (Bottom) Mounting Hole B + .003 – .000_in
- 0.213in
- Panel 1 (Bottom) Sheet Thickness Min._in
- 0.04in
- Panel 2 (Top) Mounting Hole A1 Nom._in
- 0.059in
- Panel 2 (Top) Mounting Hole A2 ± .003_in
- 0.118in
- Panel 2 (Top) Mounting Hole A3 ± .003_in
- 0.197in
- Panel 2 (Top) Mounting Hole A4 Min._in
- 0.148in
- Panel 2 (Top) Thickness Range_in
- .057 – .064in
- S ± .003_in
- 0.068in
Installation & Performance Data
| Type | Test Sheet Material | Installation (lbs.) | Anvil Dim D +.003 -.000 (in.) | Anvil Dim D + 0.08 (mm) | Anvil Dim L Min. (in) | Anvil Dim L Min. (mm) | Anvil Part Number | Body Size – Sheet Code /Part No | Punch Part Number | Pushout (lbs.) | Test Sheet Thickness | Length Code | Side-Load Force Max. (lbs.) |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| SKSF | Cold-Rolled Steel | 3300 | 0.184 | 4.67 | 0.233 | 5.95 | 8012608 | SKSF-6060 | 975200048 | 450 | .060” | ||
| SKSF | Cold-Rolled Steel | 0.184 | 4.67 | 0.233 | 5.95 | 8012608 | SKSF-6060 | 975200048 | .060” | -12 | 106 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|