SMPS-M3
Nuts for Ultra-Thin Sheets – Type SMPS, SMPP
SMPS-M3
Nuts for Ultra-Thin Sheets – Type SMPS, SMPP
Type SMPS self-clinching nuts are for installation into ultra-thin sheets. They feature a lower profile and can be mounted closer to the edge of a sheet than other self-clinching nuts.
- Installs into sheets as thin as 0.64 mm.
-
Recommended for use in sheets HRB (Rockwell “B” scale) 70 or less and HB (Hardness Brinell) 125 or less.
Type SMPP self-clinching nuts are for installation into ultra-thin sheets.- Installs into stainless steel sheets as thin as 0.64 mm.
- Corrosion resistance similar to 300 series stainless steel.
- Reduced outer dimensions and thinner sheet capabilities compared to type SP thread sizes.
- Recommended for use in stainless steel sheets HRB 90 / HB 192 or less.
Specifications
- Thread Code
- M3
- Thread Size
- M3 x 0.5
- Thread Specification
- 6H, ASME B1.13M
- Fastener Material
- 300 Series Stainless Steel
- Standard Finish
- Passivated and/or tested per ASTM A380
- For Use in Sheet Hardness
- HRB 70 / HB 125 or Less
- Product Category
- Nuts for Ultra-Thin Sheets – Type SMPS, SMPP – Metric
- Thread Type
- Internal
- Brand
- PEM
- Hole Size in Sheet +.003 / +0.08mm_mm
- 4.24mm
- PEM Product Family
- SMPS
- Product Type
- Nuts
- A Shank Max
- 0.61mm
- E ± 0.25_mm
- 5.6mm
- Hole Size in Sheet + 0.08_mm
- 4.24mm
- Min. Dist. Hole C/L to Edge_mm
- 4.3mm
- C Max._mm
- 4.22mm
- T ± 0.25_mm
- 1.4mm
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|