SOSG-3.5M3-8
Grounding Standoffs – Types SOSG, SOAG
SOSG-3.5M3-8
Grounding Standoffs – Types SOSG, SOAG
These standoffs, which use the proven self-clinching design, install with a squeeze in properly sized round holes – and become permanently mounted in the thin sheet.
Types SOAG and SOSG grounding standoffs are designed for clinching into steel or aluminum chassis while the “gripping teeth” on the opposite end of the standoff firmly contact mating PC board.
If you require a standoff which we do not offer in this bulletin, please contact us. We will be happy to work with you to satisfy your special need.
For special lengths greater than 12mm, Types SOSG and SOAG are blind threaded.
Specifications
- Thread Code
- 3.5M3
- Thread Size
- M3 x 0.5
- Thread Specification
- 6H, ASME B1.13M
- Fastener Material
- 300 Series Stainless Steel
- Standard Finish
- Passivated and/or tested per ASTM A380
- For Use in Sheet Hardness
- HRB 70 / HB 125 or Less
- Product Category
- Grounding Standoffs – Types SOSG, SOAG – Metric
- Thread Type
- Internal
- Brand
- PEM
- Grounding
- Grounding
- Hole Size in Sheet +.003 / +0.08mm_mm
- 5.4mm
- Installation Equipment/Method
- Self-Clinching
- Non-Magnetic
- Non-Magnetic
- PEM Product Family
- SOSG
- Product Type
- Standoffs
- Through Hole/Blind
- Through Hole
- H Plus Minus 025 Mm
- 6.4mm
- Hole Size in Sheet + 0.08_mm
- 5.4mm
- L Length 010 000in Or 025mm
- 8mm
- Min. Dist. Hole C/L to Edge_mm
- 6.8mm
- P Nom._mm
- 0.76mm
Installation & Performance Data
| Type | Test Sheet Material | Installation (lbs.) | Installation (kN) | PULL THRU (lbs.) | PULL THRU (N) | Pushout (lbs.) | Pushout (N) | Standoff “C” Dimension | Standoff Material | Torque-out (in. lbs.) | Torque-out (N•m) |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TSO TSOS TSOA | .025” / 0.64 mm 5052-H34 Aluminum | 700 | 3.1 | 300 | 1333 | 90 | 400 | .212” / 5.39 mm | Aluminum | 11 | 1.24 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|