SS-RTM5-1ZC
All Metal, RT® Free-Running Locknuts
SS-RTM5-1ZC
All Metal, RT® Free-Running Locknuts
PEM® RT® free-running locknuts are free-running until clamp load is induced. A modified thread angle on the loaded flank provides the vibration resistant locking feature.
- Screw turns freely until a clamp load is applied.
- Resistant to vibrational loosening.
- Back side of panel is flush or sub-flush for screw installation.
- Locking feature reusability is not affected by number of on/off cycles.
- Uses same mounting hole and installation tooling as standard S™ nut fasteners found in PEM® Bulletin CL.
Specifications
- Thread Code
- RTM5
- Thread Size X Pitch
- M5 x 0.8
- Thread Specification
- Modified thread form on loaded flank. Will accept a maximum material 6g screw.
- Shank Code
- 1
- For Use in Sheet Hardness
- HRB 80 / HB 150 or less
- Product Category
- All Metal, RT® Free-Running Locknuts
- Thread Type
- PEM nuts: For installing into stainless steel|PEM nuts: Standard
- Application Type
- Aerospace, Automotive, Automotive Electronics, Commercial Vehicles, Consumer Electronics, Datacom, Electric Vehicle Chargers, Electric Vehicles, Electronics, Industrial, Manufacturing & Sheet Metal Fabrication, Marine, Medical, Renewable Energy, Telecom
- Base Panel Material
- Aluminum, Steel
- Brand
- PEM
- Fastener Characteristics
- Locking, Threaded Internal
- Industry
- Automotive, Automotive Electronics, Datacom & Telecom, Electic Vehicles, Industrial & Commercial, Medical
- PEM Product Family
- CL
- Product Type
- Nuts
- Technology Type
- Self-Clinching
- A Shank Max
- 0.97mm
- E ± 0.25_mm
- 8.64mm
- Hole Size in Sheet + 0.08_mm
- 6.35mm
- Min. Dist. Hole C/L to Edge_mm
- 7.1mm
- Min. Sheet Thickness_mm
- 1mm
- C Max._mm
- 6.33mm
- T ± 0.25_mm
- 2mm
Installation & Performance Data
| TYPE | THREAD CODE | SHANK CODE | TEST SHEET MATERIAL | INSTALLATION (kN) | PUSHOUT (N) | TORQUE-OUT (N•m) | |
|---|---|---|---|---|---|---|---|
| SS | RTM5 | 0 | 5052-H34 Aluminum | 11.2-15.6 | 300 | 3 | |
| SS | RTM5 | 1 | 5052-H34 Aluminum | 11.2-15.6 | 480 | 3.6 | |
| SS | RTM5 | 2 | 5052-H34 Aluminum | 11.2-15.6 | 845 | 5.7 | |
| SS | RTM5 | 0 | Cold-Rolled Steel | 18-38 | 530 | 3.6 | |
| SS | RTM5 | 1 | Cold-Rolled Steel | 18-38 | 800 | 4.5 | |
| SS | RTM5 | 2 | Cold-Rolled Steel | 18-38 | 1420 | 6.8 |
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|