SSS-4mm-10ZI
SNAP-TOP® Standoffs – Types SSA, SSC, SSS
SSS-4mm-10ZI
SNAP-TOP® Standoffs – Types SSA, SSC, SSS
PEM SNAP-TOP® Standoffs (Types SSA, SSS, SSC) are designed for permanent installation into metal panels or PC boards.
These all-metal standoffs use a spring action to hold PC boards and subassemblies securely, while allowing for quick removal. Screws and other threaded hardware are eliminated. This means less parts to handle during assembly and less risk of damaging delicate circuitry because of loose parts falling into your equipment.
These standoffs are permanently installed in the panel by squeezing them into a properly sized hole using any standard press.
Specifications
- Fastener Material
- Carbon Steel
- Panel 1 Material
- Metal
- Panel 2 (Top) Material
- PC Board or Metal
- Standard Finish
- Colorless, plus clear chromate, SC1 (5µm), Type III, Zinc plated per ASTM B633
- Panel 2 (Top) Hardness Max.
- No limit
- Product Category
- SNAP-TOP® Standoffs – Types SSA, SSC, SSS – Metric
- Installation Equipment/Method
- Clinch
- PEM Product Family
- SSA, SSC, SSS
- Panel 1 (Bottom) Hardness Max._mm
- HRB 60 / HB 107mm
- Panel 1 (Bottom) Location Tolerance Max._mm
- +/-0.13mm
- Panel 2 (Top) Mounting Hole Diameter Code
- 4mm
- B ± 0.13_mm
- 4.78mm
- H ± 0.13_mm
- 6.35mm
- L ± 0.13_mm
- 10mm
- C Max._mm
- 5.39mm
- P ± 0.13_mm
- 3.58mm
- Panel 1 (Bottom) Thickness Min._mm
- 1mm
- Panel 1 (Bottom) Edge Distance C1 Min._mm
- 6.6mm
- Panel 2 (Top) Thickness Range_mm
- 1 – 1.8mm
Inventory
| Distributor | Quantity | Contact | Phone | Address | Locations |
|---|